From 36c5d5c4c8d098f408bc33313221fcfa99aca03c Mon Sep 17 00:00:00 2001 From: que01 Date: Mon, 14 Sep 2026 14:00:52 +0800 Subject: [PATCH] test: cover multiple automatic exclusion holes --- .../implement.md | 5 +++-- test/junction-build-plan-counterexamples.js | 22 +++++++++++++++++++ 2 files changed, 25 insertions(+), 2 deletions(-) diff --git a/.trellis/tasks/09-08-junction-reference-fidelity/implement.md b/.trellis/tasks/09-08-junction-reference-fidelity/implement.md index 9bd32c0..80a5ef3 100644 --- a/.trellis/tasks/09-08-junction-reference-fidelity/implement.md +++ b/.trellis/tasks/09-08-junction-reference-fidelity/implement.md @@ -27,7 +27,8 @@ - [x] 出口 A3:接缝≤1 cm,必要区域连通,无自交与排除区侵占;自动测试验证实际几何,不只是参数回显。 - 已验证:3~6 臂核心环闭合、正面积、无自交、共享内边邻接;maxSharedSeamErrorMeters 已测量核心与入口内边端点的实际米制误差,尚不等同于全图层接缝测量;入口 ring 闭合/有限/正面积;短过渡、零长度边、零宽度和排除区相切均有失败回归。 - 连通性现作为构建产物显式发布:`connectedEntryCount`、`requiredPavementConnected`、`ringArea` 和 `ringSelfIntersects`;安全孔洞回归验证孔洞保留时全部入口仍与核心相连。 - - 限定:当前支持安全孔洞与已知排除区;无法确认多个机动车通行区域时对象级拒绝闭合。全图层共享接入断面已验证,暂无任意曲线、多区域自动重求解承诺。 + - 限定:当前支持凹形边界、安全孔洞(含多个孔洞)与已知排除区;无法确认多个机动车通行区域时对象级拒绝闭合。全图层共享接入断面已验证,复杂排除区绕行和多通行区域自动重求解仍不承诺。 + - 新增回归:两个独立、包含于核心且不切断入口的孔洞会自动保留,所有入口仍保持连通;侵入必需通行区的排除区继续对象级拒绝并报告原因。 - [ ] 此阶段不通过,不开启新几何控件。 ## 3. 通用局部校正闭环 @@ -51,7 +52,7 @@ 已完成并验证的通用底座:共享来源拓扑、3~6 臂结构矩阵、重排/平移/旋转稳定性、核心与入口边界不变量、排除区域保护、入口过渡状态诊断、设施来源证据、预览/保存/刷新基础回归及端到端工作台流程。 -明确遗留:接入位置/方向/左右边界的完整编辑闭环(过渡长度本次补齐),凹形与多区域连通性,全图层接缝测量,真实 OSM 视觉验收。导流岛自由编辑和独立右转通道继续留在后续任务。 +明确遗留:复杂排除区绕行和多机动车通行区域自动重求解,全图层接缝测量,真实 OSM 视觉验收。导流岛自由编辑和独立右转通道继续留在后续任务。 ## 5. 通用性验收与发布 diff --git a/test/junction-build-plan-counterexamples.js b/test/junction-build-plan-counterexamples.js index bd660a6..6a0e32e 100644 --- a/test/junction-build-plan-counterexamples.js +++ b/test/junction-build-plan-counterexamples.js @@ -188,6 +188,28 @@ const holedCore = buildCoreClosure(tee.topology, safeHole, point(0, 0)); assert.equal(holedCore.status, 'supported'); assert.equal(holedCore.holes.length, 1); assert.equal(holedCore.requiredPavementConnected, true, 'a contained hole must preserve every required entry seam'); +const multiHoleGraph = buildJunctionBoundaryGraph( + tee.topology, + point(0, 0), + { outerRadiusFor: () => 30, innerRadiusFor: () => 10 }, + tee.helpers, + [ + { + id: 'island:hole-west', + isHole: true, + ring: [point(-1.8, -1.8), point(-0.2, -1.8), point(-0.2, -0.2), point(-1.8, -0.2), point(-1.8, -1.8)], + }, + { + id: 'island:hole-east', + isHole: true, + ring: [point(0.2, 0.2), point(1.8, 0.2), point(1.8, 1.8), point(0.2, 1.8), point(0.2, 0.2)], + }, + ], +); +const multiHoleCore = buildCoreClosure(tee.topology, multiHoleGraph, point(0, 0)); +assert.equal(multiHoleCore.status, 'supported'); +assert.equal(multiHoleCore.holes.length, 2, 'multiple contained holes must be preserved automatically'); +assert.equal(multiHoleCore.requiredPavementConnected, true); const exclusionRing = [point(-1, -1), point(1, -1), point(1, 1), point(-1, 1), point(-1, -1)]; const teeWithIsland = buildJunctionBoundaryGraph( tee.topology,