feat: make crosswalk size a constraint the geometry stage reads
Every zebra was six stripes at 3m by 0.45m on a 0.9m pitch, all literals. Depth and stripe count are now a constraint, junction-crosswalk-size, and the loop reads them. The span across the road stays derived rather than stored: it is count times pitch, and pitch is fixed because stripe and gap widths are standardised while the road they cross is not. Widening a crossing means adding stripes, which is what a real one does, and it is why the span quantises in 0.9m steps. That also fixes a span pinned at 4.95m regardless of the street. Measured, every crossing sat on a 6.50m carriageway and covered under four fifths of it. The default now follows the segment width — both directions, since a crossing spans the carriageway — giving eight stripes and 6.74m, reaching the kerb rather than stopping short. Fixture baselines move for exactly two entries on the one area with crossings; the area without them is untouched. No handle is published yet. design.md requires proving compileGeometry() consumes a parameter before any grip is drawn — the rule left over from profile.interval shipping a handle that did nothing — so the grips come next, on a value already known to work. Adding the kind made the client's exhaustive scalar switch fail to compile, which is the check working: size is a pair and has no dragged-scalar form, so that case now says so and throws rather than writing half a value. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
1 parent
84c82f3f09
commit
f3924caa5c
10 files changed
+176
-13
No files matched your search
@@ -38,6 +38,7 @@ type RoadConstraintKind =
|
||||
| 'junction-cutback'
|
||||
| 'junction-corner-radius'
|
||||
| 'junction-crosswalk-inset'
|
||||
| 'junction-crosswalk-size'
|
||||
| 'junction-stop-line-offset'
|
||||
```
|
||||
|
||||
@@ -50,14 +51,21 @@ type RoadConstraintKind =
|
||||
| `junction-cutback` | `junction-approach` | `{ cutbackMeters }` | 米 | JunctionTools |
|
||||
| `junction-corner-radius` | `junction-corner` | `{ radiusMeters }` | 米 | JunctionTools |
|
||||
| `junction-crosswalk-inset` | `junction-approach` | `{ insetMeters }` | 米,斑马线距路口边界的退让 | 主地图 / JunctionTools |
|
||||
| `junction-crosswalk-size` | `junction-approach` | `{ depthMeters, stripeCount }` | 米 + 整数条带数 | 主地图 |
|
||||
| `junction-stop-line-offset` | `junction-approach` | `{ offsetMeters }` | 米,停止线沿进口后退的距离 | 主地图 / JunctionTools |
|
||||
|
||||
前 6 个 kind 对应 PRD 首期范围(外缘、步行带、车道分隔 + 进口、cutback、角部)。
|
||||
|
||||
后 2 个于 2026-08-28 追加,是「更多元素可直接操纵」方向的第一类扩展:控制标线的**位置**
|
||||
`junction-crosswalk-inset` 与 `junction-stop-line-offset` 于 2026-08-28 追加,是「更多元素可直接操纵」方向的第一类扩展:控制标线的**位置**
|
||||
成为可编辑参数。它们不改变路口形状,只移动标线,因此不触发路口边界重算。
|
||||
放置是否成立的判据(`STOP_LINE_MAX_APPROACH_DISTANCE_METERS` 等)不在此范围内。
|
||||
|
||||
`junction-crosswalk-size` 于 2026-08-31 追加,是第一个改变标线**自身尺寸**而非位置的 kind。
|
||||
横跨道路的跨度不是存储值,而是 `stripeCount × pitch` 派生;pitch 固定 0.9m 不可编辑,
|
||||
因为条带宽与间隙在现实中是标准化的,而它横跨的道路不是。加宽靠增加条带数,
|
||||
所以跨度是**量化**的。同批修掉了「跨度恒为 4.95m,与路宽无关」的缺陷:
|
||||
无约束时条带数由整段车行道宽度推导。
|
||||
|
||||
新增 kind 的前提:**几何阶段必须已经消费它**。本项目曾为 `profile.interval` 交付过
|
||||
一个拖动无效果的手柄(见 `08-26-direct-edit-map-editor/research/interval-not-applied.md`),
|
||||
所以扩展 kind 时先证明 `compileGeometry()` 读取该参数,再画任何手柄。
|
||||
|
||||
@@ -25,6 +25,7 @@ const SOLVED_KINDS = new Set([
|
||||
'junction-cutback',
|
||||
'junction-corner-radius',
|
||||
'junction-crosswalk-inset',
|
||||
'junction-crosswalk-size',
|
||||
'junction-stop-line-offset',
|
||||
]);
|
||||
const KINDS = [
|
||||
@@ -35,6 +36,7 @@ const KINDS = [
|
||||
'junction-cutback',
|
||||
'junction-corner-radius',
|
||||
'junction-crosswalk-inset',
|
||||
'junction-crosswalk-size',
|
||||
'junction-stop-line-offset',
|
||||
];
|
||||
const MIN_LANE_WIDTH_METERS = 2.4;
|
||||
@@ -47,9 +49,19 @@ const MIN_STOP_LINE_OFFSET_METERS = 0.5;
|
||||
// These live here rather than in native-road.js because the solver must stay free
|
||||
// of fs/path — a test asserts that — so the dependency can only point this way.
|
||||
const CROSSWALK_JUNCTION_INSET_METERS = 1.5;
|
||||
// Zebra geometry. Depth runs along the approach; the span across the road is
|
||||
// `stripeCount * pitch`, not a stored number, because stripe and gap widths are
|
||||
// standardised while the road they cross is not. Pitch is not editable this phase.
|
||||
const CROSSWALK_DEPTH_METERS = 3;
|
||||
const CROSSWALK_STRIPE_WIDTH_METERS = 0.45;
|
||||
const CROSSWALK_STRIPE_PITCH_METERS = 0.9;
|
||||
const MIN_CROSSWALK_DEPTH_METERS = 1;
|
||||
const MAX_CROSSWALK_DEPTH_METERS = 12;
|
||||
const MIN_CROSSWALK_STRIPE_COUNT = 2;
|
||||
const MAX_CROSSWALK_STRIPE_COUNT = 40;
|
||||
const STOP_LINE_OFFSET_METERS = 2.7;
|
||||
/** Junction-anchored but owned by the main map, unlike the junction shape kinds. */
|
||||
const CONTROL_KINDS = new Set(['junction-crosswalk-inset', 'junction-stop-line-offset']);
|
||||
const CONTROL_KINDS = new Set(['junction-crosswalk-inset', 'junction-crosswalk-size', 'junction-stop-line-offset']);
|
||||
const GEOMETRY_VERSION = 'native-road-package/v1.1';
|
||||
|
||||
function emptyHandleManifest(context) {
|
||||
@@ -424,6 +436,35 @@ function applyJunctionConstraint(model, constraint, junctionPlans, junctionData,
|
||||
entry.crosswalkInsetMeters = inset;
|
||||
return true;
|
||||
}
|
||||
case 'junction-crosswalk-size': {
|
||||
const depth = Number(constraint.value?.depthMeters);
|
||||
const stripeCount = constraint.value?.stripeCount;
|
||||
if (!Number.isFinite(depth) || depth < MIN_CROSSWALK_DEPTH_METERS || depth > MAX_CROSSWALK_DEPTH_METERS) {
|
||||
blocking(
|
||||
diagnostics,
|
||||
constraint,
|
||||
'direct-edit-crosswalk-depth-invalid',
|
||||
`斑马线进深必须在 ${MIN_CROSSWALK_DEPTH_METERS} 到 ${MAX_CROSSWALK_DEPTH_METERS} 米之间。`,
|
||||
);
|
||||
return false;
|
||||
}
|
||||
if (
|
||||
!Number.isInteger(stripeCount) ||
|
||||
stripeCount < MIN_CROSSWALK_STRIPE_COUNT ||
|
||||
stripeCount > MAX_CROSSWALK_STRIPE_COUNT
|
||||
) {
|
||||
blocking(
|
||||
diagnostics,
|
||||
constraint,
|
||||
'direct-edit-crosswalk-stripes-invalid',
|
||||
`斑马线条带数必须是 ${MIN_CROSSWALK_STRIPE_COUNT} 到 ${MAX_CROSSWALK_STRIPE_COUNT} 之间的整数。`,
|
||||
);
|
||||
return false;
|
||||
}
|
||||
entry.crosswalkDepthMeters = depth;
|
||||
entry.crosswalkStripeCount = stripeCount;
|
||||
return true;
|
||||
}
|
||||
case 'junction-stop-line-offset': {
|
||||
const offset = Number(constraint.value?.offsetMeters);
|
||||
if (!Number.isFinite(offset) || offset < MIN_STOP_LINE_OFFSET_METERS || offset > approach.length * 0.45) {
|
||||
@@ -874,6 +915,11 @@ function resolveDirectEditConstraints(model, editDocument = null, context = {})
|
||||
}
|
||||
|
||||
module.exports = {
|
||||
CROSSWALK_DEPTH_METERS,
|
||||
CROSSWALK_STRIPE_PITCH_METERS,
|
||||
CROSSWALK_STRIPE_WIDTH_METERS,
|
||||
MAX_CROSSWALK_STRIPE_COUNT,
|
||||
MIN_CROSSWALK_STRIPE_COUNT,
|
||||
CROSSWALK_JUNCTION_INSET_METERS,
|
||||
STOP_LINE_OFFSET_METERS,
|
||||
RESOLUTION_SCHEMA,
|
||||
|
||||
@@ -16,6 +16,7 @@ const CONSTRAINT_ANCHORS = {
|
||||
'junction-cutback': 'junction-approach',
|
||||
'junction-corner-radius': 'junction-corner',
|
||||
'junction-crosswalk-inset': 'junction-approach',
|
||||
'junction-crosswalk-size': 'junction-approach',
|
||||
'junction-stop-line-offset': 'junction-approach',
|
||||
};
|
||||
const CONSTRAINT_KINDS = Object.freeze(Object.keys(CONSTRAINT_ANCHORS));
|
||||
@@ -120,6 +121,14 @@ function validateValue(scope, kind, value) {
|
||||
// it inside the intersection surface.
|
||||
if (!isFiniteNumber(value.insetMeters) || value.insetMeters < 0)
|
||||
fail(scope, 'value.insetMeters', 'must be a non-negative number of meters');
|
||||
} else if (kind === 'junction-crosswalk-size') {
|
||||
// Depth runs along the approach; the span across the road is derived from the
|
||||
// stripe count at a fixed pitch, because stripe and gap widths are
|
||||
// standardised while the road they cross is not.
|
||||
if (!isFiniteNumber(value.depthMeters) || value.depthMeters <= 0)
|
||||
fail(scope, 'value.depthMeters', 'must be a positive number of meters');
|
||||
if (!Number.isInteger(value.stripeCount) || value.stripeCount < 2)
|
||||
fail(scope, 'value.stripeCount', 'must be an integer of at least 2');
|
||||
} else if (kind === 'junction-stop-line-offset') {
|
||||
// Distance from the crossing back along the approach. Zero would put the stop
|
||||
// line on the crosswalk itself.
|
||||
|
||||
@@ -7,7 +7,15 @@ const { buildComplexJunctionGeometry, complexJunctionMetrics } = require('./comp
|
||||
const { diagnostic } = require('./diagnostics');
|
||||
// Default marking placement lives with the constraint bounds in the solver, which
|
||||
// is the IO-free module; importing the other way would drag fs into it.
|
||||
const { CROSSWALK_JUNCTION_INSET_METERS, STOP_LINE_OFFSET_METERS } = require('./direct-edit-solver');
|
||||
const {
|
||||
CROSSWALK_DEPTH_METERS,
|
||||
CROSSWALK_JUNCTION_INSET_METERS,
|
||||
CROSSWALK_STRIPE_PITCH_METERS,
|
||||
CROSSWALK_STRIPE_WIDTH_METERS,
|
||||
MAX_CROSSWALK_STRIPE_COUNT,
|
||||
MIN_CROSSWALK_STRIPE_COUNT,
|
||||
STOP_LINE_OFFSET_METERS,
|
||||
} = require('./direct-edit-solver');
|
||||
const {
|
||||
roadSurfaceId,
|
||||
sidewalkId,
|
||||
@@ -861,6 +869,9 @@ function applyDirectJunctionPlans(plans, directEdit) {
|
||||
// reshape the junction, so they deliberately do not set `changed` and trigger
|
||||
// a boundary recompute.
|
||||
if (Number.isFinite(override.crosswalkInsetMeters)) approach.crosswalkInsetMeters = override.crosswalkInsetMeters;
|
||||
if (Number.isFinite(override.crosswalkDepthMeters)) approach.crosswalkDepthMeters = override.crosswalkDepthMeters;
|
||||
if (Number.isInteger(override.crosswalkStripeCount))
|
||||
approach.crosswalkStripeCount = override.crosswalkStripeCount;
|
||||
if (Number.isFinite(override.stopLineOffsetMeters)) approach.stopLineOffsetMeters = override.stopLineOffsetMeters;
|
||||
}
|
||||
const cutbacks = Object.values(directPlan.approaches || {})
|
||||
@@ -1253,18 +1264,30 @@ function compileControlMarkings(model, lanes, diagnostics, junctionPlans = new M
|
||||
(a, b) => a.junctionDistanceMeters - b.junctionDistanceMeters || a.placement.distance - b.placement.distance,
|
||||
)[0];
|
||||
const crosswalkCandidate = approach || candidate;
|
||||
const junctionInsetMeters = approach ? crossingJunctionInset(approach, junctionPlans) : 0;
|
||||
const junctionInsetMeters = approach ? crossingJunctionInset(approach, junctionPlans, model) : 0;
|
||||
const controlCenter = offsetByMeters(crossing.coordinate, crosswalkCandidate.placement.axis, junctionInsetMeters);
|
||||
const { axis } = crosswalkCandidate.placement;
|
||||
const across = [-axis[1], axis[0]];
|
||||
for (let index = 0; index < 6; index += 1)
|
||||
// Depth and stripe count are the editable pair; the span across the road is
|
||||
// `(count - 1) * pitch`, centred on the crossing, and therefore quantised.
|
||||
const size = approachControls(junctionPlans, crosswalkCandidate.road, model);
|
||||
const stripeCount = size.crosswalkStripeCount;
|
||||
const firstOffset = -((stripeCount - 1) * CROSSWALK_STRIPE_PITCH_METERS) / 2;
|
||||
for (let index = 0; index < stripeCount; index += 1)
|
||||
crosswalks.push(
|
||||
controlFeature(
|
||||
'crosswalk',
|
||||
crossing,
|
||||
crosswalkCandidate,
|
||||
index + 1,
|
||||
rectangleAt(controlCenter, axis, across, 3, 0.45, -2.25 + index * 0.9),
|
||||
rectangleAt(
|
||||
controlCenter,
|
||||
axis,
|
||||
across,
|
||||
size.crosswalkDepthMeters,
|
||||
CROSSWALK_STRIPE_WIDTH_METERS,
|
||||
firstOffset + index * CROSSWALK_STRIPE_PITCH_METERS,
|
||||
),
|
||||
{ junctionInsetMeters },
|
||||
),
|
||||
);
|
||||
@@ -1288,7 +1311,7 @@ function compileControlMarkings(model, lanes, diagnostics, junctionPlans = new M
|
||||
const stopCenter = offsetByMeters(
|
||||
laneCenterAtCrossing,
|
||||
approach.placement.axis,
|
||||
-approachControls(junctionPlans, approach.road).stopLineOffsetMeters,
|
||||
-approachControls(junctionPlans, approach.road, model).stopLineOffsetMeters,
|
||||
);
|
||||
stopLines.push(
|
||||
controlFeature(
|
||||
@@ -1309,10 +1332,41 @@ function compileControlMarkings(model, lanes, diagnostics, junctionPlans = new M
|
||||
* defaults. The junction a road approaches is the one at its far node, which is
|
||||
* how `crossingJunctionInset()` has always resolved it.
|
||||
*/
|
||||
function approachControls(junctionPlans, road) {
|
||||
/**
|
||||
* Stripes needed to carry a zebra across `widthMeters`.
|
||||
*
|
||||
* Span is `(count - 1) * pitch + stripeWidth`, so this inverts that and rounds
|
||||
* up: a crossing that stops short of the kerb is worse than one that overruns it
|
||||
* slightly. Pitch is fixed because stripe and gap widths are standardised while
|
||||
* the road they cross is not — widening by adding stripes is what a real crossing
|
||||
* does, and it is why the span quantises.
|
||||
*/
|
||||
function stripeCountForWidth(widthMeters) {
|
||||
if (!Number.isFinite(widthMeters) || widthMeters <= 0) return MIN_CROSSWALK_STRIPE_COUNT;
|
||||
const spans = Math.ceil((widthMeters - CROSSWALK_STRIPE_WIDTH_METERS) / CROSSWALK_STRIPE_PITCH_METERS);
|
||||
return Math.min(MAX_CROSSWALK_STRIPE_COUNT, Math.max(MIN_CROSSWALK_STRIPE_COUNT, spans + 1));
|
||||
}
|
||||
|
||||
/** Total carriageway width at a segment: a crossing spans both directions. */
|
||||
function segmentWidthMeters(model, road) {
|
||||
const roads = (model?.roads || []).filter((item) => item.segmentId === road?.segmentId);
|
||||
const total = roads.reduce((sum, item) => sum + (Number(item.widthMeters) || 0), 0);
|
||||
return total > 0 ? total : Number(road?.widthMeters) || 0;
|
||||
}
|
||||
|
||||
function approachControls(junctionPlans, road, model) {
|
||||
const plan = junctionPlans.get(road?.sourceNodeIds?.at(-1));
|
||||
const approach = plan?.approaches?.find?.((item) => item.segmentId === road.segmentId);
|
||||
return {
|
||||
crosswalkDepthMeters: Number.isFinite(approach?.crosswalkDepthMeters)
|
||||
? approach.crosswalkDepthMeters
|
||||
: CROSSWALK_DEPTH_METERS,
|
||||
// Default follows the road. The span used to be a hard-coded six stripes,
|
||||
// i.e. 4.95m on every crossing whatever the street was — under half the
|
||||
// carriageway on a wide one.
|
||||
crosswalkStripeCount: Number.isInteger(approach?.crosswalkStripeCount)
|
||||
? approach.crosswalkStripeCount
|
||||
: stripeCountForWidth(segmentWidthMeters(model, road)),
|
||||
crosswalkInsetMeters: Number.isFinite(approach?.crosswalkInsetMeters)
|
||||
? approach.crosswalkInsetMeters
|
||||
: CROSSWALK_JUNCTION_INSET_METERS,
|
||||
@@ -1322,11 +1376,11 @@ function approachControls(junctionPlans, road) {
|
||||
};
|
||||
}
|
||||
|
||||
function crossingJunctionInset(candidate, junctionPlans) {
|
||||
function crossingJunctionInset(candidate, junctionPlans, model) {
|
||||
const junctionNodeId = candidate.road.sourceNodeIds.at(-1);
|
||||
const plan = junctionPlans.get(junctionNodeId);
|
||||
if (!plan) return 0;
|
||||
const inset = approachControls(junctionPlans, candidate.road).crosswalkInsetMeters;
|
||||
const inset = approachControls(junctionPlans, candidate.road, model).crosswalkInsetMeters;
|
||||
const targetDistance = Math.max(0, plan.cutbackMeters - inset);
|
||||
return Math.min(CROSSWALK_MAX_JUNCTION_INSET_METERS, Math.max(0, candidate.junctionDistanceMeters - targetDistance));
|
||||
}
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"bytes": 18111
|
||||
},
|
||||
"comparison.json": {
|
||||
"contentHash": "d8d4fc7d72527fce08c766f1619777a69813080a2def35652c402edd55a64a2e",
|
||||
"contentHash": "11a057394a8023953386c4dc2b35022281eaf7a5d61f989a82b4f43c33d64a32",
|
||||
"bytes": 1015
|
||||
},
|
||||
"compiled.json": {
|
||||
@@ -27,8 +27,8 @@
|
||||
"bytes": 99978
|
||||
},
|
||||
"layers/crosswalks.geojson": {
|
||||
"contentHash": "72079521c1f6891b77b226b87ee3656c113f3a72c4fb51981dfdaa9dafc4eeb2",
|
||||
"bytes": 28012
|
||||
"contentHash": "3123c6f4ae5f35e91aff854576df6131d20341d6297451fe262b9eed4c7f1cc1",
|
||||
"bytes": 37342
|
||||
},
|
||||
"layers/direction_arrows.geojson": {
|
||||
"contentHash": "5e60d48520fa09aa75a8aa9bb89c4701c7f5dabc4e5ce57c9dc87bdefbbf3d1c",
|
||||
|
||||
@@ -499,6 +499,37 @@ const stopOnly = resolveDirectEditConstraints(
|
||||
).junctionPlans.get('junction').approaches['segment:a'];
|
||||
assert.equal(stopOnly.cutbackMeters !== 4, true, 'a stop-line offset must not be written as a cutback');
|
||||
|
||||
// Crosswalk size reaches the geometry, and bad values are refused rather than
|
||||
// clamped. The kind exists only because compileGeometry() reads it — the rule
|
||||
// design.md sets after `profile.interval` shipped a handle that did nothing.
|
||||
{
|
||||
const sized = resolveDirectEditConstraints(
|
||||
controlModel,
|
||||
document([controlConstraint('junction-crosswalk-size', { depthMeters: 4, stripeCount: 10 })]),
|
||||
{},
|
||||
);
|
||||
const plan = sized.junctionPlans.get('junction').approaches['segment:a'];
|
||||
assert.equal(plan.crosswalkDepthMeters, 4);
|
||||
assert.equal(plan.crosswalkStripeCount, 10);
|
||||
|
||||
for (const [value, rule] of [
|
||||
[{ depthMeters: 0, stripeCount: 8 }, 'direct-edit-crosswalk-depth-invalid'],
|
||||
[{ depthMeters: 3, stripeCount: 1 }, 'direct-edit-crosswalk-stripes-invalid'],
|
||||
[{ depthMeters: 3, stripeCount: 6.5 }, 'direct-edit-crosswalk-stripes-invalid'],
|
||||
]) {
|
||||
const bad = resolveDirectEditConstraints(
|
||||
controlModel,
|
||||
document([controlConstraint('junction-crosswalk-size', value)]),
|
||||
{},
|
||||
);
|
||||
assert.equal(bad.constraintStates[0].applied, false);
|
||||
assert.ok(
|
||||
bad.diagnostics.some((item) => item.rule === rule),
|
||||
`${JSON.stringify(value)} must produce ${rule}`,
|
||||
);
|
||||
}
|
||||
}
|
||||
|
||||
// A crosswalk-inset handle must publish the ceiling that still moves the zebra.
|
||||
//
|
||||
// `crossingJunctionInset()` saturates once the inset reaches the cutback, and
|
||||
|
||||
@@ -47,6 +47,8 @@ function valueFor(kind) {
|
||||
return { radiusMeters: 6 };
|
||||
case 'junction-crosswalk-inset':
|
||||
return { insetMeters: 1.5 };
|
||||
case 'junction-crosswalk-size':
|
||||
return { depthMeters: 3, stripeCount: 8 };
|
||||
case 'junction-stop-line-offset':
|
||||
return { offsetMeters: 2.7 };
|
||||
default:
|
||||
@@ -100,6 +102,7 @@ assert.deepEqual(CONSTRAINT_KINDS, [
|
||||
'junction-cutback',
|
||||
'junction-corner-radius',
|
||||
'junction-crosswalk-inset',
|
||||
'junction-crosswalk-size',
|
||||
'junction-stop-line-offset',
|
||||
]);
|
||||
|
||||
|
||||
@@ -115,6 +115,7 @@ const KIND_LABELS: Record<ConstraintKind, string> = {
|
||||
'junction-cutback': '进口 cutback',
|
||||
'junction-corner-radius': '角部圆角',
|
||||
'junction-crosswalk-inset': '斑马线退让',
|
||||
'junction-crosswalk-size': '斑马线尺寸',
|
||||
'junction-stop-line-offset': '停止线偏移',
|
||||
};
|
||||
|
||||
|
||||
@@ -108,6 +108,12 @@ export function constraintValueFor(
|
||||
return { insetMeters: Math.max(0, scalar) };
|
||||
case 'junction-stop-line-offset':
|
||||
return { offsetMeters: Math.max(0, scalar) };
|
||||
case 'junction-crosswalk-size':
|
||||
// Size is a pair — depth and stripe count — so no single dragged scalar
|
||||
// produces it, and the solver emits no handle of this kind. Reaching here
|
||||
// means one appeared without a matching input path; failing loudly beats
|
||||
// writing half a value.
|
||||
throw new Error('junction-crosswalk-size has no scalar form; it is written by the element size controls');
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -29,6 +29,10 @@ export const JUNCTION_KINDS = [
|
||||
'junction-cutback',
|
||||
'junction-corner-radius',
|
||||
...CONTROL_KINDS,
|
||||
// Size is deliberately outside CONTROL_KINDS: it has no handle yet, and its
|
||||
// value is a pair rather than the scalar the parameter panel renders. It joins
|
||||
// the panel when the corner grips exist to drive it.
|
||||
'junction-crosswalk-size',
|
||||
] as const;
|
||||
|
||||
export type RoadConstraintKind = (typeof ROAD_KINDS)[number];
|
||||
@@ -98,6 +102,7 @@ export type ConstraintValue =
|
||||
| { offsetMeters: number; transition?: Transition }
|
||||
| { widthMeters: number; transition?: Transition }
|
||||
| { boundaryIndex: number; offsetMeters: number; transition?: Transition }
|
||||
| { depthMeters: number; stripeCount: number }
|
||||
| { cutbackMeters: number }
|
||||
| { radiusMeters: number }
|
||||
| { insetMeters: number };
|
||||
|
||||
Reference in new issue
Block a user